Boost your WiFi signals using a Coke Can [How]

Now Boost your WiFi signals with this simple trick.The clever trick of a useless Beer Can( Coke Tin) will be an ultra Tech Hack.This method has been proven to improve the WiFi strength around 2 bars to about 4 on average. Through this trick all you have to waste is just a Beer Can.

Materials Required:
(Note: You can also use any Coke Tin  )

Boost your WiFi signals using a Beer Can

Step 1: Make sure that there is no residue left inside.

Step 2:  Take off the Ring Pull from the Beer Can.

Step 3: Cut the end of the Beer Can where there is no opening using a safety knife.

Step 4: Cut along the Red dotted line and leave some area at the hole area.

Step 5:Now Cut the Can as it is figure.

Step 6: Open up the middle piece of the metal as shown.

Step 7: Being careful, open up the middle piece of metal by bending it until it  resembles the shape of a radar dish :)

Step 8: Place the Completed WiFi booster on your Router properly towards the direction of main WiFi provider.

Warning: 

• Be Careful with the sharp edges around the Beer Can. I`m not responsible for any cause :O

Video:

You can view the Video from here